Dog Transportation in Vehicles
Transportation practices range from unrestrained dogs on the rear seat, front passenger seat, or in the footwell, to dogs riding on the driver’s seat or in the driver’s footwell, or in the cargo area of a station wagon or SUV. In cargo areas, dogs may travel without restraint, behind a cargo net or barrier, or inside a dog travel crate. Safety harnesses connected to the vehicle are also used on passenger seats.
These arrangements are not equivalent from a safety perspective. A freely moving dog may be injured during braking or a collision and may also endanger vehicle occupants. A net or barrier can limit the dog’s movement between vehicle compartments but does not necessarily restrain the dog within its compartment. Protective performance always depends on the particular design and how it is installed.
CVSI explains the different transportation arrangements and distinguishes between restraining the dog within the vehicle and the loads and injury risks the animal itself may face in a crash.
Overview of Restraint Systems
Systems used to secure dogs in vehicles include dog safety harnesses connected to the vehicle, dog travel crates, and partitions made of barriers or nets. They serve different purposes: a harness is intended to restrain the dog through defined connection points; a crate confines the dog to a designated space and should retain its restraint function in a crash; a partition primarily seeks to prevent the dog from entering other areas of the vehicle.
For harnesses, relevant factors include fit, strap routing, connecting hardware, and attachment to the vehicle. For crates, structural stability, doors and latches, vehicle anchorage, size, and installation position are also important. A cargo barrier should not automatically be equated with an individually tested restraint system.
The available scientific evidence does not yet allow a general conclusion as to which restraint systems provide the best protection for dogs under different crash conditions.
CVSI therefore examines transport crates, safety harnesses and other restraint solutions without presupposing the superiority of any particular system. We distinguish between a system’s technical restraint performance and its actual protective effect on the dog.
Dog Travel Crates: Designs and Materials
Dog travel crates differ in shape, dimensions, materials, doors, and attachment methods. Available products include single- and double-compartment crates, vehicle-specific models, and universal designs. Common constructions include aluminum or steel frames, plastic crates, and combinations of materials.
Different designs affect weight, space requirements, handling, visibility, ventilation, and how the crate behaves under mechanical loads. The material alone is not decisive; the entire construction, including joints, doors, latches, and anchorage points, must be considered.
Crate size must take into account both the dog’s welfare during ordinary travel and the particular demands of a crash. Research on everyday driving and studies of crash loads address different questions.
Dog Crates in Europe and the United States
Different crate designs, anchorage solutions, and testing approaches are common in Europe and the United States. Alongside metal vehicle crates, robust one-piece plastic constructions are particularly common in the United States. Neither material nor country of origin alone provides a reliable safety ranking.
An assessment must consider which crash directions and loads were tested, how the crate was secured during the test, which test surrogate was used, and which criteria were applied to evaluate the results. Results from different countries can therefore be compared directly only when the test conditions are sufficiently similar.
CVSI aims to provide an objective assessment of publicly available information on crate designs and testing methods, considering both restraint performance and potential injury risks to the dog.
Canine Injuries and V-AIS
To assess protective measures meaningfully, we must first understand what injuries dogs sustain in vehicle crashes, how severe they are, and under what circumstances they occur. This is where the Veterinary Abbreviated Injury Scale (V-AIS) comes in. It provides a systematic approach to describing and grading injuries and offers a basis for comparable datasets.
The work of Kathryn Loftis and her colleagues provides an important scientific reference point. CVSI aims to explore how such classification approaches might be applied to injuries sustained by dogs traveling in vehicles. CVSI does not currently maintain its own injury registry.
Vehicle and Crash Safety
The forces involved in frontal, rear-end and side-impact collisions can differ considerably. In addition to speed and deceleration, the dog’s position in the vehicle, its available movement space and the interaction between the restraint system, the dog and the vehicle structure are important factors.
For transport crates, positioning, attachment, deformation characteristics and interaction with the rear seatback and vehicle structure may influence the loads involved.
For safety harnesses, relevant questions include movement restriction, force transmission to different body regions, strap routing, and the strength of connectors and vehicle attachment points.
The potential injury risks associated with these different restraint concepts require further scientific investigation.
Restraint Systems and Crash Testing
The technical performance of a restraint system is an essential safety criterion.
For transport crates, relevant factors include structural integrity, attachment to the vehicle and the reliability of doors and locking mechanisms.
For safety harnesses, important factors include the strength of straps, stitching, connectors and attachment points, as well as reliable restriction of the dog’s movement.
However, successfully passing a technical load or restraint test does not fully establish the loads to which the dog may be exposed during a crash. Both inside a transport crate and when using a safety harness, the dog may experience substantial accelerations, forces and concentrated loads.
Open Research Questions
- What injury patterns occur in dogs under different crash conditions?
- How do body size, weight, anatomy and posture influence injury-related loads?
- What protective effects do transport crates, safety harnesses and other restraint systems provide under different crash conditions?
- What roles do attachment method, vehicle position, rear seatback and vehicle structure play?
- How do crate dimensions, design and deformation characteristics, on the one hand, and harness fit, strap routing and force transmission, on the other, influence injury-related loads?
- Which canine-specific test dummies, measurement parameters and biomechanical assessment criteria are needed?
- How can findings from real-world road traffic accidents be linked to technical crash testing?
CVSI aims to highlight these knowledge gaps and encourage dialogue among veterinary researchers, crash safety specialists, and testing organizations, helping to establish a foundation for injury-focused assessment of canine vehicle restraint systems. Initial activities will focus on research reviews and expert interviews.
Research Gap: Injuries to Dogs Traveling as Vehicle Occupants
Reliable data remain limited on restrained versus unrestrained dogs traveling inside vehicles and on links between particular restraint systems, injury patterns, and clinical outcomes. Findings concerning dogs struck by vehicles cannot automatically be applied to dogs riding inside vehicles.
Technical crash tests primarily examine the structural integrity of dog travel crates, the strength of their attachments, and the performance of restraint systems. Assessing real-world protection also requires evidence on the types and severity of injuries dogs sustain in road crashes.
International Veterinary Trauma and Injury Databases
Different international data sources support research into injuries in dogs. VetCOT (Veterinary Committee on Trauma) is a specialized, internationally used veterinary trauma registry documenting clinical injury cases, mechanisms of injury, and outcomes. Publications by Hall and colleagues demonstrate the research value of such registry data (see Publications).
In Europe, broader research resources complement trauma registries. VetCompass at the Royal Veterinary College (United Kingdom) analyzes electronic veterinary clinical records and has supported research on road traffic accidents involving dogs. SAVSNET at the University of Liverpool likewise analyzes veterinary clinical and laboratory records. Insurance data, including those held by Agria in Sweden, may offer additional epidemiological insights.
These resources differ in purpose, clinical detail, and populations covered. It has not been established that they systematically record the type of restraint used by a dog inside a vehicle.
Comparison of Testing Methods
Various organizations have conducted dynamic tests on dog travel crates or other pet restraint systems. Their methods differ in test setup, crash direction, deceleration pulse, test surrogate, vehicle anchorage, and assessment criteria. Similar test speeds alone therefore do not make results directly comparable.
CVSI initially intends to document and compare publicly available methods. This does not constitute an independent certification scheme or a ranking of the safest dog crates.
Technical Performance of the Restraint System
Does the system withstand the loads involved? Do attachment points, connectors and locking mechanisms remain functional? Is the dog reliably restrained?
B does not automatically follow from A
Injury-Related Loads on the Dog
What accelerations, forces and concentrated loads act on the dog? What injury risks arise from contact with crate walls, force transmission through a harness or interaction with vehicle structures?
Both aspects need to be investigated. Satisfactory performance on the first does not automatically establish satisfactory performance on the second.
Central research questionHow can technical restraint performance and actual injury protection be investigated and assessed separately for different canine transport and restraint systems?
| Organization | Test subject / method | Public information |
|---|---|---|
| Center for Pet Safety (USA) | Dynamic testing of travel crates; restraint performance and structure | Test protocols, results, videos |
| RISE / SP (Sweden) | SPCT: frontal, rear, and drop loads | SPCT method (2016), selected reports |
| TÜV SÜD (Germany) | Product testing, including 4pets; dynamic tests | Certificates, product-specific information |
| TCS (Switzerland) | Comparative testing of dog transportation systems | Test reports |
| ÖAMTC (Austria) | Studies of pet restraint systems | Reports and videos |
| TÜV Italia (Italy) | References to testing of pet carriers; details to be clarified | General method descriptions |
| RACE / IDIADA (Spain) | Documented demonstration and dynamic tests | Individual reports; no confirmed uniform crate standard |
| Allianz Center for Technology (Germany) | Demonstration tests involving unrestrained dogs | Technical information and videos |
The methods cannot be compared directly without examining their respective test conditions. This overview is not a product rating or certification.
